Why is my Breville espresso not working (how to fix it) - specialty coffee maker (2023)

Espresso machines are among the most popular.Manufacturers of a range of automatic, semi-automatic and manual espresso machines that produce some of the best flavored coffee.

Espresso coffee smells and tastes wonderful. It makes our mornings better, gives us energy to get through the afternoon, and gives us something to look forward to at the end of a long day. But how you brew your espresso is just as important as what you put into your espresso machine. A poorly maintained or broken machine can affect the quality of your coffee, which is why we are here today.

If you have been feeling disappointed with the performance of your device lately, there are several reasons that could be responsible. Even if you give your device proper care and maintenance, there may still be some issues that need to be addressed.Here are some reasons why my Breville espresso is not working:

Why is my Breville espresso not working?

If your Breville espresso machine runs but no coffee comes out of the brew head, it may be clogged or the grind setting is incorrect. Here's how to fix both problems.

Constipation at the head of the group.

To resolve the issue, wash your espresso machine regularly to prevent the solenoid valve from malfunctioning and clogging. At home, you should clean your chemical-free espresso machine once a week after 200 chemical shots or after 200 chemical shots, whichever comes first.

At the end of each work day, you should rinse your Breville espresso machine in a commercial setting. The following instructions will help you properly wash your Breville espresso machine.

1. Disconnect the filter holder from the machine and remove the filter basket and replace it with a backwash disk.
2. Place the backwash cleaner in the basket.
3. Return the portafilter to the brew group and press the 2 cup button.
4. After about 20-30 seconds the machine goes quiet due to the pressure build up and then shuts off.
5. When the cycle is complete, remove the portafilter and make sure that the tablet has completely dissolved. If not, repeat the process several times without adding any cleaning products.
6. Rinse the portafilter well before filling it with coffee for later use.

Problems with the grind setting

If the machine does not brew coffee, the grind may be too fine or there may be too much coffee in the basket. To resolve this, you need to adjust the size and amount of grind.

grinding degree.

1. Locate the grind size locator, which ranges from 1 (very fine) to 16 (very coarse).
2. Set the grind level to five, but you can adjust it over time. The coffee grind should be fine to get good shots of espresso, but not too fine that it becomes dusty.

amount of grinding

1. Locate the knob on the front of the machine that adjusts the size of the grind.
2. Turn the knob counterclockwise to decrease the grind size and clockwise to increase it.
3. Set the grind setting to the 3 o'clock position and adjust if necessary.
4. To test if the change worked, try taking a shot.

Breville espresso maker won't pump water

To repair an espresso machine that won't pump water, you must first follow the flow of water to identify the cause of the clog. How to troubleshoot your espresso machine to get the water pump working again.

• When the Breville espresso machine is not pumping water, it is steam locked. Vapor lock occurs when you prime the machine immediately after it heats up. Since the boiler is hot and the air pressure causes the pump to block the flow of water, you need to follow the steps below to force the water pump to draw water from the dagger into the boiler system.
• Fill the water tank with filtered water.
• Place a cup under the brew and steam nozzle.
• Turn on the power switch and open the knob on the steam wand.
• Let it sit for two minutes, then press the brew button and let it sit for two minutes.
• Turn off the brew button, leave the steam wand open for two minutes, and turn off the machine.
• After a few minutes, run a cycle to check that the espresso machine is pumping water.
• Make sure the line is not clogged or kinked while checking the machine for water. Make sure the connection line between the espresso machine and the filter is not twisted, adjust or replace it if necessary.
• Make sure the valves on the machine work properly. The Breville espresso machine has a solenoid valve that controls the flow of water through the group head. When you put on the group head, the water flows through the valve. The valve will click when you press the brew button, indicating that it is working properly. If it does not click, the solenoid valve is stuck and needs to be replaced.
• Dirt and debris from the water supply can clog the system.coffee machineand prevent the water from reaching the head of the group. The Breville espresso machine has many water lines with gigleurs, small dosing nozzles in the pipes that control the flow. Over time, dirt and debris build up and clog the gigleurs, blocking the flow of water.
• Make sure the filter is not clogged and needs to be replaced. If you grind the coffee too fine, the filter will clog and prevent the flow of water.
• If your espresso machine has not been descaled for a long time, limescale may be blocking the water pump. Descale your espresso machine to remove scale that may be blocking the water pump.

How to clean a Breville espresso machine

Regular cleaning of the grinder and abrasive discs ensures consistent grinding results. Follow the instructions below to clean and unclog.

1. Open the hopper lid and remove the remaining coffee beans.
2. Replace and lock the hopper, then run the grinder to remove grit from the system.
3. Remove the funnel to access the grinder.
4. Use a vacuum to remove soil debris from the outside of the grinder where the hopper is located.
5. To remove the top burr, turn the metal handle counter-clockwise. If the burr is stuck to the burr, you may need to use more force to remove it.
6. Use a small brush or burr brush to remove the coffee grounds from the burrs, making sure all the nooks and crannies are clean.
7. Vacuum the inside of the grinder.
8. Align the grinding wheel with the grinder, turn it clockwise to secure it, and push the metal handle down.
9. Replace the funnel and latch, then replace the lid.

How do you change a Breville water filter?

The water filter in your Breville espresso maker reduces limescale. Depending on the hardness of the water supply in your area, you should replace the filter every two to three months.

1. Unpack the new water filter and place it in a glass of filtered water for five minutes.
2. Rinse the filter under cold running water.
3. Remove the water tank from the espresso machine and remove the old water filter.
4. Clean the water filter holder with cold water and rinse.
5. Insert the new water filter between the two parts of the filter holder.
6. Align the base of the portafilter with the adapter on the water tank and push it until it clicks into the water tank.
7. Fill the tank with cold water and put it back in the espresso machine.
8. Run a cleaning cycle to reset the filter indicator.

How to clean a Breville espresso machine

Follow the steps below to run a deep clean cycle on your Breville coffee maker.

1. Run a flush cycle to flush coffee or milk from the system.
2. Insert the cleaning disk into the cup filter disk.
3. Insert the filter basket into the filter holder.
4. Place a cleaning tablet in the filter.
5. Attach the filter holder to the brew head.
6. Turn off the coffee maker.
7. Press and hold the 1-Cup, 2-Cup, and On/Off buttons simultaneously for three seconds until the Clean light flashes.
8. The cleaning cycle starts and stops automatically.
9. Remove the portafilter and make sure that the cleaning tablet is completely dissolved.
10. Rinse the coffeemaker by running two or three cycles with clean water to remove any residue from the cleaning tablet.

How do I reset my Breville espresso machine?

To reset your Breville espresso machine, all saved settings will be restored to their default settings. to reset yourespresso machine, press and hold the program button until the espresso machine beeps three times, then release the button. Espresso volumes and temperature settings are reset to default settings.

You can also reset it by putting the device to sleep, unplugging it, and plugging it back in after a few minutes.

Diploma

The Breville espresso machine is among the most durable on the market, but it does occasionally have problems. However, most problems are straightforward and easy to fix once you've identified the cause of the problem. We hope this article helps you understand why my Breville espresso is not working.

frequent questions

How do you reset a Breville espresso machine?

Press and hold the PROGRAM button until the machine beeps three times.Release the PROGRAM button.

How to unclog a Breville espresso maker?

• Fill a heatproof mug with water.
• Place the cup under the steam nozzle of your machine.
• Turn on your Breville steamer and let the water bubble into your mug.
• After a few minutes, turn off the steamer and remove the mug.
• Clean the steam nozzle on your Breville and you're done!

Related Post

• How to make whole bean coffee: (3 ways)
• The best espresso machine under $400
• How to make a cappuccino with an espresso machine
• Keurig 2.0 won't pump water (quick fix)
• Keurig 2.0 Touch Screen Not Working (3 Easy Steps)
• The Best Beans for Breville Barista Express
• The Best Grind Size for Breville Espresso (Quick Guide)
• How to decalcify your Breville precision coffee maker (8 easy steps)
• Delonghi The Breville Specialist Barista Express
• How to keep hot chocolate warm without electricity
• Can you do Nespresso hot water?
• How to exit descaling mode of Nespresso Vertuo